Sony 2-Channel Amplifier (XM2200GTX) (XM-2200GTX)
|
 |
Description
Juice up your car stereo with high, clean, and efficient power using Sony's XM-2200GTX Xplod model 2-channel automotive power amplifier. Simple to install and configure, the class A/B amp is capable of driving 200 reliable watts per channel RMS (continuous) into 4-ohm speakers (400 watts peak), or up to 600 wpc peak into 2-ohm speakers. Alternately, you can use it as a bridged, monaural amp for a road-rattling 1,200 watts per channel--buy one for every speaker in your system. Feed the XM-2200GTX line-level RCA signals from your CD or cassette head unit, or speaker-level outputs from the same using a standard 4-pin connector. Handy stereo RCA passthrough jacks let you add additional amplifiers--now at a later date--to handle rear speakers or mono-block amplification. Mount the XM-2200GTX in the trunk or under your seat, attach the inputs, set your level, and crank up the tunes. You get up to 10 dB of bass boost (centered at 40 Hz) if your car, music, or neighborhood really cries out for it. Controls include LPF (low-pass filter) selection, cut-off frequency adjustment (50 or 300 Hz), low-boost control, and the master level-adjustment control. A protection circuit and indicator protects the unit from damage. The amp is equipped with an ultra-quick MOSFET (Metal Oxide Semiconductor Field Effect Transistor) power supply and MOSFET output devices made to handle high volumes of current while providing optimal frequency response and control. Its built-in power regulator converts the power supplied by the car's DC 12V battery into high-speed pulses using a semiconductor switch. These pulses are stepped-up by the built-in pulse transformer and separated into both positive and negative power supplies before being converted into direct current (DC) again. This lightweight power supply provides highly efficient power with a low-impedance output. What's in the Box
Amplifier, mounting screws (4), high-level input cord (1), protection cap (1), a user's guide with installation manual, and warranty/registration information. Note: Installation required, instructions provided.
Product Description
Sony knows that a steady power source is the foundation of a great sound system. That's why they design their Xplod amps with pulse power supplies for consistent output to maximize power distribution to your speakers. The XM-2200GTX 2-channel amplifier puts this reliability to good use with 200 watts RMS power per channel (or 500 watts RMS bridged), plenty of power for a subwoofer or two. The variable bass boost (0-10dB at 40 Hz) kicks up the lows when it's needed, and you can switch on the variable low-pass filter to keep the low frequencies tight and crisp. Extra-sturdy, gold-plated terminals give you reliable signal and power connections, and the speaker-level inputs allow for easy integration with any system, even a factory radio.
|