I came home from work tonight to find my new Canon's had arrived. After mowing my bumpy lawn for 1 1/2 hrs on my riding mower and using my gas powered blower for a half hour cleaning the driveway I thought I would open the Canon's up and check them out before it became to dark. If anyone has ever used a gas powered blower for any length of time you know how your arms and hands feel right after you get done. aT first I looked through them without trying the stabilization and it was like looking through binoculars while using a pogo stick, my hands where shaking like a jack hammer. When I pushed that button it was pure joy. It was as still a picture as looking through my spotting scope on a tripod. At 7;30 with the sun well on it's way to setting it was a very bright and clear image. I have never had the opportunity to look through any $ 1000+ glasses, but I would have to say from my first impression that the majority of people are going to be pleasantly surprised by the quality of the image with these glasses and the image stabilization is amazing. For the price these are going for you can't go wrong.

I bought this pair of binoculars after reading the reviews of several different pairs/brands. I bought them for an Alaskan cruise I just came back from. I cannot say enough about how great these binoculars are. The IS techncology is particularly amazing cause most of the viewing I did was on a moving vessel. The IS technology greatly compensated for any movement from my less than steady hands, and even when supported on the side of the ship, they eliminated much of the jitter from the moving ship. These binoculars really made my trip to Alaska that much more enjoyable. Aside from the IS technology, the Canon lens provide an incredibly clear and crisp image to rival binoculars that cost hundreds more. I did get a chance to see through a pair of $1000.00 Zeiss binoulars while on my trip and they were not noticably any better then the Canon binoculars and lacked the IS technology. The IS really makes a big difference.

A grad student tried a pair of these Canon image stabilized binoculars at an observatory's star party and while he thought the binocs were very fine, he didn't agree with all the other astronomers around him that they were that much better than normal binocs..........

As for myself, I read every review I could find before deciding to purchase these 10x30 IS Canon binocs. I've had them for nearly a week now and have done some careful observing and decided to share my thoughts to help others who may be "sitting on the fence" and worried about the occasional bad review seen here or elsewhere.

I will be using these binocs for many kinds of observing , but
mostly for astronomy, nature observing and for the fun of using them -- they are very enjoyable to just plain use 'em.

Astronomy use puts optics to a severe test, but these performed far better than expected, and I expected rather much. First, I didn't expect the brightness to be so good. For a 10x30, they are clearly letting through almost all of the light entering the objective lenses, even with all those elements and prisms. I own a wonderful set of french APX 10x60 military naval binocs, and these little Canons were actually brighter on daylight objects and offered truer colors, too. Color fringing is very minimal, but visible on very bright objects in the night sky and at the edges of light-colored objects in daylight, but only if you are really trying to see it. On bright stars, there is some flaring, but lesser stars are tiny and tinier dots of light, just as they should be -- not as fine as you'd see in the finest apochromatic refractors, but about as fine as you'll see in any 10x30 binocular. Image sharpness is excellent all the way to the edge of the field of view and the image "snaps" into focus just like a good refractor telescope. For some reason, I find that the image is at its most superb about halfway to the edge and I most enjoy seeing the stars just below dead center for a relaxing and most crispy view. At 60 degrees apparent field of view, this is wide enough that you don't feel like you're looking down a tunnel, as on some binocs where this specification is only about 45 degrees or so. The 3mm exit pupil on these is a bit small and does make your adjustment of the binocs rotating eyepiece turrets more critical and does add a bit of fatigue keeping the eyepieces centered on your eyes. By comparison, my french 10x60s with their huge 2" oculars offer a much more relaxed view -- assuming you have them mounted on a stable platform though. On the plus side, a 3mm exit pupil is better for those with eye astigmatism who prefer not to wear glasses while observing. The binocs will accomodate your near or far sightedness naturally and as the light will only be using 3mm of your eye opening, astigmatism is usually not a problem. So take off your eyeglasses and you'll enjoy using these even more.

As others have said, the image stabilization is the breakthrough feature of these 10x30s and the other Canons in their IS line-up. When I HOLD down (not just click on) the IS button, in about six seconds the image goes from terribly shaky and rather unpleasant to view to moderately stabilized to locked-in full stabilization. If you let go of the button, the image immediately reverts back to "shakey as ever". And if you press the button again without much delay, you don't have to wait the six seconds for full stabilization, but only a fraction of a second in practical use. Some have written that the IS feature causes a lessening of resolution or sharpness in the image, but not in these 10x30s -- the image is tack sharp.
The image stabilization works perfectly for most practical uses. If you shake like Mohammed Ali, these binocs will not help you, but if you have a reasonably stable set of arms, these will do the rest to give you a virtually motionless view -- even while someone (else!) drives the car on your next trip.

A few minor nits, or how Canon can make these even better!
The focus is so wonderfully sharp and precise that Canon needs to put a finer thread screw on the focusser as it is a bit hard to obtain precise focus without constantly overshooting. This will cost Canon about nothing to improve. Oh, and I DO like the fact that the objectives move when you focus and not the eyepieces. In most binocs, pressing against the eyepieces will cause defocussing. And for a few pennies, Canon could integrate a flip-down-and-under objective lens cover which would certainly be nice. Or maybe even a simpler two-piece combination objective and eyepiece cover set that connect to each other with stretchcord on each side -- simply pull off and use -- stretch back-on and protect. Finally, as even alkaline batteries will last 4 hours continuously using the IS, why not change the IS "press and hold" button to and on-off switch with 5-minute auto-off. Gets to be a bit of a bother holding the button down all the time you are looking through them. Canon, are you listening?

So, what's my bottom line? Well, if you were to lay a pair of $1200. Zeiss binocs of similar power on the table along with a pair of these Canons I would still choose the Zeiss. Surprized? Allow me to explain: I sell the Zeiss on eBay and use that $1200. to buy FOUR pairs of these Canons which offer far higher practical resolution and fun over all the other binocs out there. Christmas is coming and these Canons have more WOW factor than anything I can think of for the money.

Oh, as for that grad student at the observatory who didn't think much of these binocs on first use -- when informed the next night that he had to HOLD the IS button and not just click it, he changed his mind somewhat .......... LOL

I just received these binoculars yesterday and am already enjoying them immensely. They are without a doubt the best binoculars I have ever owned or looked through, and at a great price compared to many high end brands. The image stabilization is just magical (I also have this technology in my camcorder and digital camera) and with it on, the image is rock solid and crystal clear. I even jiggled the binocs on purpose and the image was stable, but moved wildly when I turned off the stabilization. I am getting older and my hands aren't as steady as they used to be but I feel like I have the hands of a brain surgeon when I use these.

Tip: when you first press the stabilizer button after it hasn't been used for a few minutes it takes a few seconds (5 or 6) for the stabilization to engage and you may think it isn't working. After the initial warm-up, if you continue to use the button every few minutes the stabilization is instantaneous. I wasn't surprised as it takes about the same amount of time for my camera optical image stabilizer to start working after I turn on the camera.

I just received my 10x30IS, my first pair of high quality, made in Japan binoculars, and found out about the 3 year warranty provided by Canon USA. I bought it thinking it had just 1 year. This makes for a very sound investment in a marvelous technology.

It works great on regular AA rechargeables. No expensive proprietary li-ion packs or hard-to-find batteries to deal with here.